Customization: | Available |
---|---|
After-sales Service: | 1 Year |
Warranty: | 1 Year |
Still deciding? Get samples of US$ 285/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
High Pressure Washer | |
Model | SG7500 |
Electric Motor | 7500W/10HP |
Voltage | 380V |
Frequency | 50Hz |
Pressure | 250BAR |
Speed | 1450RPM |
Max Flow | 15L/MIN |
High pressure pipe specifications (Φmm*m*S layer) | 8*10*2 |
Business Type: | Manufacturer/Factory & Trading Company | |
Main Products: | Direct Driven Air Compressor , Oil Free Series Compressor , Belt Driven Air Compressor , ... |
|
Number of Employees: | 100 | |
Year of Establishment: | 2008-03-16 | |
Management System Certification: | ISO9001:2015 | |
OEM/ODM Availability: | Yes |
1. The split design of the copper block of the pump head has stronger pressure bearing capacity and is more convenient for later maintenance;
2. The pressure gauge is located in front of the whole machine, making it easy to observe the pressure at any time and adjust the pressure according to user needs;
3. The oil mirror is located on the side of the pump head, making it easy to check the oil level at any time;
4. The design space of the box is enlarged, the internal pressure is reduced, and the oil temperature is lowered;
5. The reciprocating position of the plunger adopts composite cloth water seal, which has better sealing effect and longer life;
6. The high-pressure pipe uses 8*10 steel wire pipe. The Ø8 diameter inner hole has small water flow resistance. There are steel wires sandwiched inside the high-pressure pipe, which has higher high-pressure resistance and longer service life;
7. The connection position of the high-pressure water gun high-pressure pipe is equipped with a 360-degree rotating joint, which solves the problem of pipe winding during actual use and makes it more convenient to use; (2.2/2.6/3KW)
8. Each machine is equipped with nozzles with four different water angles: 0 degrees, 15 degrees, 25 degrees, and 40 degrees, allowing users to replace the nozzles at any time according to different requirements;
9. When designing the machine shape considering the actual situation of the user, multiple machines can be superimposed (up to four) to save space for the user;
10. Three-phase with low voltage protection, the protection switch will give an alarm when the voltage is lower than the set minimum voltage (350v);